1. Physischer Aufbau

1. Auspacken: Fassen Sie das Gerät am Rahmen an. Vermeiden Sie direkten Druck auf das Bildschirmglas.
2. Anschlüsse: * Stecken Sie das Mini-HDMI/HDMI-Kabel in Ihren PC. Stecken Sie das USB-C/Micro-USB-Kabel in einen mit Strom versorgten USB-Anschluss Ihres PCs oder einen mit Strom versorgten USB-Hub.

2. Windows-Konfiguration

Sobald es angeschlossen ist, behandelt Windows dies als einen standardmäßigen zweiten (oder dritten) Monitor.

1. Klicken Sie mit der rechten Maustaste auf Ihren Desktop und wählen Sie Anzeigeeinstellungen.
2. Suchen Sie das neue 10,5-Zoll-Display.
3. Stellen Sie sicher, dass die Ausrichtung auf „Querformat“ eingestellt ist.
4. Stellen Sie Skalierung und Layout auf 100 % ein. (Alles, was höher ist, lässt die Fluginstrumente unscharf oder abgeschnitten aussehen).
5. Positionieren Sie das Display in der virtuellen Karte so, dass es der Position auf Ihrem Schreibtisch entspricht.

3. Flugsimulations-Setup (MSFS 2024 / X-Plane)

Um Ihre Instrumente auf diesem Bildschirm „auszuklappen“:

1. Laden Sie Ihr Flugzeug im Simulator.
2. Halten Sie die Taste Rechts Alt (Alt Gr) gedrückt und klicken Sie mit der linken Maustaste auf den PFD- oder MFD-Bildschirm im virtuellen Cockpit.
3. Ein neues Fenster wird angezeigt. Klicken Sie auf das Lupensymbol (oben rechts in diesem Fenster), um es in ein verschiebbares Fenster zu verwandeln.
4. Ziehen Sie dieses Fenster auf Ihr EFIS-Display und drücken Sie Alt+Enter, um es bildschirmfüllend darzustellen.

Wichtige Pflegehinweise

• Hitze: Lassen Sie das Gerät nicht in direkter Sonneneinstrahlung oder in der Nähe eines Heizkörpers.
• Reinigung: Verwenden Sie ausschließlich ein trockenes Mikrofasertuch. Verwenden Sie keine Fensterreiniger oder scharfen Chemikalien auf dem Bildschirm oder dem Kunststoff.
• Kabel: Achten Sie darauf, dass kein „Zug“ auf den Anschlüssen liegt. Verwenden Sie die mitgelieferten Kabelmanagement-Clips.

Benötigen Sie Freigabe?

Sollten Sie Probleme bei der Einrichtung haben oder der Bildschirm nicht angeht, sind wir für Sie da.

• E-Mail: Contact@iesims.com

PFD (EFIS) Setup Instructions

1. Unboxing & Physical Setup

Handling:

• Handle the unit by its frame. Avoid direct pressure on the screen glass.

2. Cable Connections

Your PFD (EFIS) includes:

• 1 × HDMI cable (Power and Video)
• 1 × USB-C cable (Power )

Each cable has:

• One end at a 90° angle — this plugs into the rear of your display unit.
• One straight end — this connects to your PC or power supply.

Wiring Steps:

1. Plug the 90° angled ends into the corresponding ports on the rear of your display unit.
2. Route the straight ends to your PC:
   
   HDMI cable → video input on your PC
   USB-C cable → powered USB port on your PC or external power supply
   
   

3. Windows Configuration

Once plugged in, Windows will automatically detect the new display as a standard monitor.

1. Right-click your Desktop and select Display Settings.
2. Locate the new PFD display.
3. Set Orientation to "Landscape".
4. Set Scale and Layout to 100%. (Higher scaling will make flight instruments appear blurry or cut off).
5. Position the display in the virtual arrangement map to match where it sits on your desk.

4. Powering On Your Display

⚠️ Critical: Your display has a physical power button on the back right-hand side of the screen.

• If the display does not power on immediately, you must press the power button on the rear of the unit.
• You will need to access this button whenever the display powers off, so ensure the rear of your setup is accessible.
• Be aware you may need to lean over or reach behind the setup to press this button.

5. Flight Sim Setup (MSFS)

Your PFD contains two physical screens. You'll need to pop out two instrument screens from the simulator and resize them to fit within your PFD frame.

Popping Out the First Screen (Left Side):

1. Load into your aircraft in the simulator.
2. Hold Right Alt (Alt Gr) + Left-Click on the Primary Flight Display in the virtual cockpit.
3. A new window will appear. Click the Magnifying Glass icon (top right of that window) to convert it into a moveable window.
4. Drag the window onto your PFD display, positioning it to fit the left screen area.

Popping Out the Second Screen (Right Side):
5. Hold Right Alt (Alt Gr) + Left-Click on the Multifunction Display (or Navigation Display) in the virtual cockpit.
6. Click the Magnifying Glass icon to make it moveable.
7. Drag the window onto your PFD display, positioning it to fit the right screen area.

Resizing Both Screens:
8. Resize and position both windows so they fit perfectly within the left and right screen frames of your PFD unit.
9. Press Alt+Enter on each window to make them full-screen once positioned and sized correctly.

Alternative — Pop-Out Manager:
For easier setup and management, use a Pop-Out Manager tool (such as MSFS Pop Out Panel Manager) to automatically arrange and resize both instrument windows to match your PFD frame layout.

6. Care Instructions

• Heat: Do not leave the unit in direct sunlight or near a radiator.
• Cleaning: Use a dry microfibre cloth only. Do not use window cleaner or harsh chemicals on the screen or plastic frame.
• Cable Management: Ensure cables have no tension on the ports. Route cables carefully to avoid stress on connectors.

7. Need Help?

If you experience any setup issues or your display isn't powering on:

📧 Email: Contact@iesims.com

ECAM Setup Instructions

1. Unboxing & Physical Setup

Handling:

• Handle the unit by its frame. Avoid direct pressure on the screen glass.

2. Cable Connections

Your ECAM includes:

• 1 × HDMI cable (Power and Video)
• 1 × USB-C cable (Power)

Each cable has:

• One end at a 90° angle — this plugs into the rear of your display unit.
• One straight end — this connects to your PC or power supply.

Wiring Steps:

1. Plug the 90° angled ends into the corresponding ports on the rear of your display unit.
2. Route the straight ends to your PC:
   
   HDMI cable → video input on your PC
   USB-C cable → powered USB port on your PC or external power supply
   
   

3. Windows Configuration

Once plugged in, Windows will automatically detect the new display as a standard monitor.

1. Right-click your Desktop and select Display Settings.
2. Locate the new ECAM display.
3. Set Orientation to "Landscape".
4. Set Scale and Layout to 100%. (Higher scaling will make flight instruments appear blurry or cut off).
5. Position the display in the virtual arrangement map to match where it sits on your desk.

4. Powering On Your Display

⚠️ Critical: Your display has a physical power button on the back right-hand side of the screen.

• If the display does not power on immediately, you must press the power button on the rear of the unit.
• You will need to access this button whenever the display powers off, so ensure the rear of your setup is accessible.
• Be aware you may need to lean over or reach behind the setup to press this button.

5. Flight Sim Setup (MSFS)

To display your ECAM screen on this unit:

Popping Out the ECAM Screen:

1. Load into your aircraft in the simulator.
2. Hold Right Alt (Alt Gr) + Left-Click on the ECAM screen in the virtual cockpit.
3. A new window will appear. Click the Magnifying Glass icon (top right of that window) to convert it into a moveable window.
4. Drag the window onto your ECAM display.

Resizing the Screen:
5. Resize the window so it fits perfectly within your ECAM frame.
6. Press Alt+Enter to make it full-screen once positioned and sized correctly.

Alternative — Pop-Out Manager:
For easier setup and management, use a Pop-Out Manager tool to automatically arrange and resize the ECAM window to match your frame layout.

6. Care Instructions

• Heat: Do not leave the unit in direct sunlight or near a radiator.
• Cleaning: Use a dry microfibre cloth only. Do not use window cleaner or harsh chemicals on the screen or plastic frame.
• Cable Management: Ensure cables have no tension on the ports. Route cables carefully to avoid stress on connectors.

7. Need Help?

If you experience any setup issues or your display isn't powering on:

📧 Email: Contact@iesims.com